Factory-Direct 10-Piece Standard MOQ Custom Sampling Available DDP Where Available
Get a Quote →
REAL FACTORY · SIALKOT, PAKISTAN · SMALL-BATCH B2B PRODUCTION

Low MOQ Clothing Manufacturer From 10 Pieces

Test a clothing design without committing to hundreds of garments. ClothingManufacturer.US offers eligible custom cut-and-sew manufacturing from 10 pieces: one design, one color and three sizes. We review additional colorways and size combinations individually, explain the cost of short runs, and help international brands plan an accurate first order.

Custom cut & sewPrivate-label optionsDDP on confirmed routesUSA · UK · Canada · Australia · EuropeFree standard branding extras at 30+ total

Standard T-shirt and hoodie quotations include one basic small DTF or DTG brand-logo print. Free woven neck labels, hang tags and custom zipper polybags apply at 30+ total pieces. Most development samples cost US $90–$150, while complex garments can cost more. Sample-cost adjustment may apply only to a subsequent bulk order of more than 30 pieces.

Fabric checking and cutting preparation in the clothingmanufacturer. Us factory in sialkot, pakistan
Actual factory work · Fabric planning and garment preparation in Sialkot
10 piecesStandard MOQ · one design, one color and three sizes
30+ totalWoven neck labels, hang tags and custom zipper polybags included
50+ piecesGenerally more competitive wholesale quotations
$90–$150Typical sample-development range; complex garments may cost more
01 / SMALL-BATCH ORDERS WITHOUT THE GUESSWORK

Our 10-Piece Minimum, Explained Clearly.

Low MOQ only helps a clothing brand if the counting rules are clear. Our standard manufacturing arrangement is 10 garments of one design in one color, across three sizes. We can review different color and size mixes, but short runs use more material and setup time per piece, so nonstandard combinations may increase the quoted amount.

1 DESIGN

One garment specification

Start with a single agreed pattern or garment construction. A hoodie and a jogger are different styles, even when you plan to sell them together.

1 COLOR

One approved colorway

The standard 10-piece price basis covers a single color. A second color introduces fabric sourcing, lay planning or decoration changeover work.

3 SIZES

One manageable size run

Distribute the ten units across three sizes, for example S, M and L. A broader graded range can be quoted separately.

Flexible where production allows—not a misleading universal minimum.

Our factory can consider a two-color ten-piece test run or a more varied size split, but these changes are assessed against fabric waste, cutting efficiency, trims and printing setup. Specialist materials or custom-dyed fabric may impose a supplier minimum beyond our standard garment MOQ.

  • Stock or available fabric colors can make small orders more practical.
  • Extra colorways or styles may carry additional production charges at low quantities.
  • The 30-piece branding benefit is based on total order quantity, including different designs and colors—not 30 pieces per design.
  • Custom trims, zippers, dye lots and specialist materials still have their own feasibility rules.
  • We confirm the actual accepted configuration and any additional manufacturing charge in the written quote.

For the definition of MOQ and how factories count units, read our minimum order quantity guide. This service page focuses on placing a real small-batch order.

Industrial sewing machines on the clothing manufacturing floor in sialkot
Original factory photography: small orders still require real cutting, sewing and production setup.
30 pieces total unlocks standard free branding accessories: custom woven neck labels, hang tags and custom zipper polybags are provided at no additional charge. For example, 10 black tees + 10 white tees + 10 hoodies = 30 pieces and qualifies, provided the individual production configurations are approved. This is separate from the sample-credit rule: a 30-piece order does not qualify for sample-cost adjustment; that requires more than 30 pieces.
02 / QUANTITY PLANNING

Realistic Small-Batch Order Configurations.

These examples show how style, color, sizing and total order quantity affect feasibility and free-branding eligibility. They are planning examples, not automatic acceptance or fixed-price offers.

Requested productionHow the MOQ appliesWhat to expect
10 black T-shirts
S × 3, M × 4, L × 3
One style, one color, three sizesStandard configuration — material and printing feasibility still confirmed.
10 hoodies: 5 black + 5 greyOne style with a nonstandard two-color splitCustom quote — possible adjustment charge for color changes and extra fabric waste.
20 sweatshirts: 10 black + 10 creamOne style, two colors, ten per colorStandard colorway quantity — two separately priced color batches.
12 shirts across four sizesOne style, one color, wider-than-standard sizingCustom quote — review pattern grading, markers, waste and size quantities.
10 hoodies + 10 joggersTwo styles, each with its own patternQuoted as two garment styles even if they form a matching collection.
30-piece mixed collection
10 black T-shirts + 10 white T-shirts + 10 hoodies
Three 10-piece color/style batches; 30 pieces in totalFree branding accessories — standard woven labels, hang tags and custom zipper polybags included. Does not qualify for sample credit.
50 custom hoodies
One design and color, agreed sizes
A 50-piece volume quotationBetter wholesale potential — shared setup and better fabric utilization may improve the unit price, subject to final specifications.
29-piece test collectionDepends on styles and colorway distributionRequest a breakdown by design, color and size. Sample cost is not adjustable against a 29-piece bulk order.

Do not confuse these thresholds: 30 pieces total qualifies for free standard woven neck labels, hang tags and zipper polybags, even across designs/colors. Sample-cost adjustment is a separate benefit that may apply to an eligible subsequent bulk order of 31+ pieces only, under agreed quotation terms. Extra styles/colors can still require additional setup charges.

03 / PRICING AND SAMPLE POLICY

Know What You're Paying for Before You Order.

Small-batch garment production has real setup costs even when you order just ten pieces. We make those costs easier to plan by incorporating the applicable sample-development work into the quoted sample price, then quoting the approved manufacturing run based on its specification.

Typical development sample
US $90–$150

Setup costs incorporated in the sample quote

For many standard garments, the agreed sample price covers relevant patternmaking, design preparation, printing screens or comparable decoration setup, and individual sample construction. Complex jackets, specialist materials and detailed work may exceed US $150. We confirm the actual development scope before work begins.

Single-piece samples involve extra machine adjustments and skilled labor. Shipping can represent a substantial portion of an international sample quotation: please check whether courier charges are included or separately itemized. Revisions outside the approved sample scope may be requoted.

Sample-cost adjustment rule

Bulk order must exceed 30 pieces.

When you proceed to a qualifying bulk order of 31 pieces or more, the sample price may be adjusted against the bulk invoice under the agreed quotation terms. A 10-, 20-, 29- or exactly 30-piece production order does not qualify for this adjustment.

Written terms matter: the exact eligible amount and how it is applied should appear in your bulk quotation before payment.

Garment shipping is quoted separately.

We offer DDP shipping where the destination and route support it. Bulk garment prices exclude shipping. For sample development, the written quotation confirms whether express courier charges are included or charged separately. DDP and other delivery terms are confirmed for eligible destinations.

QUANTITY-BASED FACTORY PRICING

Illustrative Factory Prices at 10, 30 & 50 Pieces

These are indicative USD per-garment rates based on your quantity and standard specifications—not guaranteed prices for every design. Regular T-shirts use 100% cotton, 180–220 GSM; regular hoodies use 250–300 GSM plain-color fabric. Both include one basic small DTF or DTG company/brand logo print. International shipping is excluded.

Order quantityBasic cotton T-shirtStandard hoodieBranding benefit
10 pieces$10–$12 / piece$18–$25 / pieceOne basic small logo print included
30 pieces$8–$10 / piece$13–$20 / piecePlus woven neck labels, hang tags and custom zipper polybags at no extra charge
50 pieces$6–$8 / piece$11–$17 / pieceFree standard branding accessories; more favorable wholesale cost potential

How to read these prices: one approved design/color configuration is the normal MOQ basis. Mixed designs/colors may introduce additional setup expenses even when the combined order earns free branding accessories. Embroidery, larger or multiple prints, 350–500 GSM heavyweight hoodies and complex construction are quoted by specification. These prices do not include international freight, duties or taxes; refer to the written quotation for all final terms.

Why the Per-Piece Price Rises on Tiny Runs

Manufacturing ten garments requires many of the same preparations as making fifty. On a small run, setup time, material remnants, machine changeovers and inspection work are divided by fewer finished pieces.

FABRIC

Marker efficiency & waste

Cutting just a few garments can leave fabric remnants that cannot be reused efficiently. Multiple colors or size changes increase the amount of fabric handled.

SETUP

Pattern, screens & machine preparation

Pattern drafting, artwork preparation, cutting setup, threading, machine adjustment and special decoration still take time whether you order 10 pieces or 100.

SOURCE

Special trims & fabric availability

Mill minimums, dyed-to-order materials, unusual hardware or branded packaging can be disproportionately expensive at low quantities.

For most standard products, wholesale pricing becomes more competitive from about 50 pieces, because fabric purchasing and setup costs are spread over more units. There is no universal discount percentage: fabrics, designs and decoration methods change the result. Read our clothing manufacturing cost guide for further budgeting and quotation factors.

04 / PRODUCTS FOR FIRST-RUN BRANDS

Custom Clothing We Can Review for Small Batches.

We support B2B apparel development across several garment categories. Final suitability for a 10-piece order depends on materials, construction, embellishment and sourcing—not simply the product name.

Custom t-shirt manufacturing sample photographed at our sialkot factory

Custom T-Shirts & Oversized Tees

Standard T-shirt quotations typically use 100% cotton jersey at 180–220 GSM and include one small DTF/DTG brand-logo print. Larger artwork, complex detailing or additional colorways may change costs.

Explore custom t-shirts manufacturing
Custom hoodies produced in assorted colours at our clothing factory

Custom Hoodies & Sweatshirts

Regular hoodie pricing is typically based on 250–300 GSM plain-color fabric with one small DTF/DTG logo. We also work with 250–500 GSM options; heavier fabrics and embroidery require a tailored quotation.

Explore custom hoodies manufacturing
Custom tracksuit sample from our clothing manufacturing portfolio

Tracksuits & Joggers

Matching tops and bottoms need separate style counts, size ratios and consistent fabric lots. Set pricing depends on construction and decoration.

Ask about a matching-set order
Sportswear and teamwear manufacturing samples from our factory

Sportswear & Training Apparel

Team shirts, training tops and performance garments can be planned in small batches with appropriate fabric, stitching and branding.

Explore sportswear manufacturing
Fully custom cut-and-sew

Your pattern, dimensions and construction.

A custom manufacturing order can involve new or adapted patterns, fabric selection, size grading, cut-and-sew construction, trims and garment finishing. The sample is used to confirm the reference before the production run.

Blank garment customization

Different production model, different quote.

Applying a logo to an available blank may suit some small projects, but it is not the same service as building clothing from your own approved patterns. Tell us which model your brand needs so the quotation is comparable.

05 / REAL MANUFACTURING, CONTROLLED SCALE

From Your Idea to an Approved Small Production Run.

Our workflow is designed to identify costly decisions before production. A ten-piece garment run still deserves a measurable specification, approval checkpoints and clear commercial terms.

01

Send a compact production brief

List the garment, sketch or reference, fabric direction, size breakdown, colors, quantity, artwork, labels, and destination. We can discuss missing details before a quote.

02

Confirm small-batch feasibility

We review the style, available material, fabric waste, colorway splits, trims and printing method. The quote explains where custom choices add cost or affect minimums.

03

Develop and approve a paid sample

A typical sample is $90–$150, depending on specifications; its quoted price incorporates the relevant pattern, design and decoration setup. Review fit, construction and appearance.

04

Lock the production specification

Approve sample, measurements, fabric, color, embroidery/print placement, size ratio, labels, packing, price, payment and agreed shipping arrangement before cutting the run.

05

Manufacture, check and pack

Fabric is prepared, cut and stitched, decoration is applied, and garments are inspected against the agreed sample and requirements before packing.

06

Arrange delivery and retain files for reorders

We prepare the quoted international shipment, including DDP where offered for that route. Retain approved specifications to discuss repeat runs and future collections.

07 / SMALL BATCH, SERIOUS SPECIFICATIONS

What We Check Before Your Garments Ship.

A ten-piece run should still be assessed against the sample and approved technical requirements. You can agree objective checks during development rather than discovering mismatches after delivery.

01

Materials & color

Check fabric type, chosen GSM where relevant, color approval, visible fabric defects and necessary trims against the sample and purchase order.

02

Fit & measurements

Compare finished measurements, garment silhouette and key construction details against the approved size chart and agreed tolerances.

03

Branding & packing

Review placement and appearance of prints, embroidery or labels; confirm size identification, finishing and packing instructions.

Any formal test, independent inspection or special tolerance regime requested by the buyer should be agreed in the order scope. We do not claim an unverified universal certification or zero-defect guarantee.

08 / INTERNATIONAL B2B SOURCING

Small-Batch Manufacturing in Pakistan, Delivered Worldwide.

Our factory is in Sialkot, Pakistan. We work with customers in the USA, UK, Canada, Australia and European countries who need custom apparel at manageable first-order quantities.

  • Bulk garment prices exclude international shipping. Freight is quoted according to destination, order size, chargeable weight and service.
  • Direct express courier: typically around 6–8 days after dispatch, often more expensive, and not offered as DDP under this service.
  • DDP shipping: typically around 10–12 days after dispatch, with an approximate ±2-day variation; available only for confirmed eligible routes and terms.
  • Manufacturing or sample handling time is separate from courier transit. Customs, peak-season cargo conditions and carrier delays can affect arrival.
  • When comparing Pakistani production with domestic sourcing, assess quality, approved specifications and the total delivered cost rather than only unit price.
Packed custom clothing orders prepared for shipment at a clothing factory in sialkot
Original factory portfolio: packed garment orders ready for dispatch.
09 / QUESTIONS FROM REAL BUYERS

Low MOQ Manufacturing FAQs.

Practical answers on 10-piece manufacturing, volume pricing, one-logo printing, free branding at 30+ total pieces, sampling, and international delivery.

Ask About Your Exact Order ↗
What is your minimum order for custom clothing?

Our standard MOQ is 10 pieces of one design in one color, across three sizes. Alternative color and size configurations can be reviewed, with possible additional production charges.

Can I order only 10 fully custom cut-and-sew hoodies?

Yes, subject to fabric and production feasibility. Regular hoodie quotations typically use 250–300 GSM fabric and include one small DTF/DTG logo print. Heavier 350–500 GSM fabric, extra prints or embroidery can increase the quotation.

Can I split 10 pieces into two colors?

The standard 10-piece arrangement covers one color. A 5-and-5 split or other mixed-color arrangement can be reviewed, but added cutting, sourcing and fabric waste can increase the quotation. Such exceptions are not automatic.

Can 10 garments include more than three sizes?

Our standard offer covers up to three sizes. Ask for a custom quote if your collection requires four or more sizes; the material usage, grading and small size quantities may add cost.

Do you accept 1–9-piece production orders?

Our advertised small-batch production minimum is 10 pieces under the standard configuration. Individual development samples are a separate, paid stage and should not be confused with an advertised 1–9-piece production service.

How much does a development sample cost?

Most standard development samples cost US $90–$150. Complex garments such as detailed jackets or specialist custom work can cost more. Your individual quote states development and shipping inclusions.

Are patternmaking and printing setup charged separately for samples?

The sample quotation incorporates applicable patternmaking, design preparation, printing screens where relevant and other setup work for the agreed sample. Changes or new specifications after approval should be re-quoted before work begins.

Is the sample price deducted from a bulk order?

Sample charges may be adjusted against a subsequent bulk production order only when the bulk quantity is more than 30 pieces. Orders of exactly 30 pieces or fewer do not qualify. The amount and treatment of the adjustment should be confirmed in writing in the production quotation.

Why is the cost per piece higher for ten garments?

Small runs still require pattern review, laying, cutting, machine setup, decoration setup, quality checks and packing. Fabric remnants and color changes also create more waste per finished garment; these costs are spread across fewer units.

Can I order a hoodie and matching joggers as one ten-piece style?

Hoodies and joggers have different patterns and construction, so they are normally quoted as separate styles. Send the required counts for both pieces and we can assess whether an adjusted small-set order is feasible.

Do you manufacture real cut-and-sew garments or customize blanks?

We offer custom cut-and-sew production according to approved garment specifications as well as relevant garment-decoration services. Tell us whether you need original patterns and construction or branding on an existing garment format.

Can I add woven neck labels, hang tags and packaging?

Yes. For orders totaling 30 pieces or more, standard custom woven neck labels, hang tags and custom zipper polybags are included at no additional charge—even if the total is split across different styles and colors. Orders below 30 pieces can request these items, subject to quotation. More specialized packaging may carry extra charges.

Do you offer DDP shipping to the USA, UK, Canada, Australia or Europe?

DDP is available on eligible confirmed routes, with indicative transit of around 10–12 days after dispatch (approximately ±2 days). Direct express shipping may take around 6–8 days but is more expensive and not DDP. All delivery timeframes are estimates; garment prices exclude freight.

What information should I send for a 10–29-piece quote?

Send the product type, reference or tech pack, fabric composition and GSM if known, one or more colorways, exact sizes, quantities per color, artwork, labels or packaging and delivery destination. We can help clarify incomplete specifications.

How long do samples and small production runs take?

Development samples are typically handled within 7–10 days, depending on specifications and ongoing factory work; regular samples are usually planned within about two weeks. Small-batch bulk production is scheduled separately according to materials, complexity and approvals. Shipping time is additional.

Can I reorder the same design after testing demand?

Yes, request a repeat-order quote using the approved sample and pattern specifications. We recheck fabric, color and trim availability, current production cost and shipping terms so the reorder matches the agreed standard.

Is a 30-piece order eligible for sample-cost adjustment?

No. Orders of 30 pieces qualify for free standard woven neck labels, hang tags and zipper polybags, but sample credit may apply only on subsequent bulk orders exceeding 30 pieces (31+), under agreed quotation terms.

Can you ship to brands outside the United States?

Yes. Our manufacturing facility is in Sialkot, Pakistan and we serve B2B buyers in the USA, UK, Canada, Australia, Europe and other markets. Delivery method and DDP availability depend on the destination and confirmed terms.

Is a small brand-logo print included in your T-shirt and hoodie prices?

Yes. Our standard indicative T-shirt and hoodie manufacturing prices include one basic small brand or company-logo print using DTF or DTG. Larger graphics, multiple placements, special effects and embroidery can increase the final price.

What are your approximate 10-piece T-shirt and hoodie prices?

For standard specifications, 10 basic 100% cotton, 180–220 GSM T-shirts are typically quoted at $10–$12 each, while 10 regular 250–300 GSM hoodies are around $18–$25 each. Each includes one basic small DTF/DTG logo print; shipping is extra and final pricing depends on the approved design.

Are woven neck labels, hang tags and zipper bags free at 30 pieces?

Yes. Our standard custom woven neck labels, hang tags and custom zipper polybags are included at no additional charge when your total order reaches 30 pieces. That is a combined-order threshold, not 30 pieces per color or design.

Can I combine T-shirts and hoodies to reach the 30-piece free-branding threshold?

Yes. For example, 10 black T-shirts, 10 white T-shirts and 10 hoodies add up to 30 pieces and qualify for the standard free-label and packaging benefit. Each style/color combination still requires feasibility review and may have different manufacturing costs.

Is your sample fee refundable when I order exactly 30 pieces?

No. A 30-piece order qualifies for free standard branding accessories, but sample-fee adjustment is considered only for a subsequent bulk order of more than 30 pieces. The eligible amount is subject to the written quotation, not an automatic cash refund.

Why is the 50-piece per-unit price lower than the 10-piece price?

Costs for patterns, design preparation, cutting setup, thread and machine changeovers are distributed across more garments. Fabric waste and material purchasing can also improve at higher quantities. 50+ pieces generally offer more competitive wholesale economics, without a guaranteed percentage discount.

Can you manufacture heavyweight hoodies in 400 or 500 GSM?

We can review hoodie fabric options from approximately 250 to 500 GSM. Our standard illustrative hoodie prices are for approximately 250–300 GSM. A 400–500 GSM hoodie uses more material and requires a separate quotation based on fabric, size and decoration.

Is embroidery more expensive than a small DTF or DTG print?

Generally yes. Embroidery cost depends on design size, stitch count, digitizing, thread changes and positioning. One basic small DTF/DTG logo is included in our standard illustrative T-shirt and hoodie quotes; embroidery is evaluated according to your artwork.

Is international shipping included in the garment price?

No. Our indicative per-piece garment prices exclude international shipping. We quote delivery based on the destination, box dimensions or chargeable weight, shipment size and chosen service. DDP availability is confirmed route by route.

Why can international clothing samples cost more than expected?

A one-off sample requires individual pattern and machine setup, and express international courier charges can be a substantial part of the total. For example, a sample quotation of $150 might include around $60–$80 of courier freight, depending on destination and current rates. We confirm whether courier costs are included in your individual sample quote.

Can I order custom varsity jackets with PU leather sleeves?

Yes, subject to the agreed specification. For qualifying quantities, we can review wool-body varsity jackets with PU (synthetic) leather sleeves, chenille patches, quilted lining and embroidery. Genuine leather is a different material and requires its own quotation. Freight is separate.

10 / START YOUR ORDER

Tell Us What You Want to Manufacture.

Get a factory-direct quotation for a custom small-batch order. Share your garment, colors, sizes and destination so we can evaluate whether your specification fits the standard 10-piece arrangement or requires an adjusted quote.

  • 10 pieces · 1 design · 1 color · 3 sizes is our standard starting configuration.
  • Additional colors or alternative size mixes may be possible with extra charges.
  • Most development samples are US $90–$150, with complex garments sometimes higher and courier inclusions confirmed in writing.
  • Sample-cost adjustment is for bulk orders of more than 30 pieces only.
  • DDP shipping available where supported and confirmed in the quote.
  • One standard small DTF or DTG logo print is included in the quoted T-shirt/hoodie prices.
  • At 30+ total pieces, standard woven neck labels, hang tags and custom zipper polybags are included free—even across designs and colors.
  • More competitive wholesale pricing generally starts at 50+ pieces; freight is separate.

Request Your Small-Batch Manufacturing Quote

Complete the details below. Your message opens in WhatsApp for review before it is sent.

Your inquiry is prepared for WhatsApp and is not sent until you review and submit it there. Attach reference images or tech packs in WhatsApp or email. Factory pricing includes basic logo printing only where stated; standard free branding starts at 30 pieces total. Sample, shipping, and other project terms are confirmed in writing.

ClothingManufacturer.US · Custom cut-and-sew production in Sialkot, Pakistan